ØMIN3x18Lx10SHx50 OAL SC ID GROOVING TOOL WITH COATING

ØMIN4.5x71.6°x12Lx8SHx50 SC ID BC TOOL WITH COATING

Ø4H6x15FLx4SHx50 OAL SC REAMER WITH COATING

Ø3.9x15FLx4SHx50 OAL SC DRILL WITH COATING

Ø16x45FLxR2.0x16SHx100 OAL SC BULLMILL UN-COATED

Ø2x5FLx4SHx50 OAL SC ENDMILL UN-COATED

Ø2x10FLx4SHx50 OAL SC BALL MILL UN-COATED

Ø3x15FLx4SHx50 OAL SC BALL MILL UN-COATED

Ø3.0x20FLx4SHx55 OAL SC REAMER WITH COATING

Ø2.0x20FLx4SHx55 OAL SC REAMER WITH COATING

Ø2.98x20FLx4SHx55 OAL SC REAMER WITH COATING

Ø2.9x20FLx4SHx55 OAL SC DRILL WITH COATING

Ø1.98x20FLx4SHx55 OAL SC REAMER WITH COATING

Ø1.9x20FLx4SHx55 OAL SC DRILL WITH COATING

Ø10x4Wx8SHx50 OAL SC T CUTTER WITH COATING

Ø6.1x130FLx8SHx160 OAL x140° SPL SC DRILL WITH COATING

Ø15x100FLx16SHx140 OAL 140° SC SPL DRILL WITH COATING

Ø3x35FLx6SHx75 OALx140° SC DRILL WITH COATING

Ø8x60FLx8SHx100 OAL 140° SC DRILL WITH COATED

SC STEP FORM TOOL Ø4x90°xØ8.5x1Lx45°x12SHx65 OAL WITH COATED

Ø8x0.76Rx8SHx70 OAL S RADIUS FORM TOOL

Ø6.2x45FLx8SHx80 OAL SC DRILL WITH COATING FOR SS.

Ø3.57x25FLx6SHx65 OAL SC HOLE MILL WITH COATED

Ø1x5FLx3SHx70 OAL SC DRILL UN-COATED FOR ALU

Ø13.1x35FLx14SHx75 OAL SC HOLEMILL COATED

Ø8x82°x8SHx64 OAL SC CHF TOOL WITH COATING FOR SS

Ø10x0.75Rx40FLx10SHx80 OAL SC BULL MILL COATED

Ø8x20FLx8SHx100 SC ENDMILL WITH COATING

Ø12.9x40FLx12SHx80 OAL SC DRILL COATED

Ø3.45x20FLx4SHx64 OAL SC DRILL WITH COATING FOR SS

Ø8x0.6Rx13FLx8SHx65 OAL SC BULLMILL INOX TYPE WTITH COATING

Ø9.9x40FLx10SHx75 OAL SC HOLEMILL WITH COATING

Ø2x3FLx3SHx50 OAL SC BALL MILL FOR ALU

Ø1.575x6FLx3x12Lx4SHx50 OAL SC REAMER FOR ALU

Ø4x20FLx4SHx100 OAL SC BALL MILL FOR ALU

Ø8x35FLx8SHx110 OAL SC BALL MILL FOR ALU

Ø8x35FLxR1.0x8SHx75 OAL SC BULL MILL FOR ALU

Ø15.9x35FLx120°x16SHx80 OAL SC CHF HOLEMILL WITH COATING

ØMIN3x15Lx4SHx50 D/EDGE LH BACK BORING TOOL

Ø6x100°x3.2SHx16 OAL HSS SPL BACK CHF TOOL

Ø2x10FLx6RLx4SHx60 OAL SC SPL SLOT DRILL

Ø3x15FLx10RLxØ3.4SHx60 OAL SC SLOT DRILL

Ø4.95x6.64FLx8°x2.5Lx5.3SHx20FLx60 OAL SC STEP DRILL

Ø3.7x4.5LxØ6x30FLx6SHx80 OAL SC STEP DRILL

Ø6.35x6Lx82°xØ13.2x5Lx16SHx60 OAL SC STEP DRILL

Ø2x15FLx4SHx50 OAL SC SPL SLOT DRILL

Ø3x10FLx4SHx50 OAL SC SPL SLOT DRILL

Ø2x6FLx6SHx60 OAL SC SINGLE FLUTE ENDMILL

Ø2x5FLx10RLx4SHx50 OAL SC SPL SLOT DRILL

Ø12x30FLx8.0Rx7.5Lx12SHx75 OAL SC RADIUS FORM TOOL

Ø8.4x30FLx10SHx75 OAL SC DRILL FOR ALU

Ø16x45FLx65NLx16SHx100 OAL SC ENDMILL FOR ALU

ØMIN2.8x1.4Rx6Lx6SHx40 OAL SC SPL FACE GROOVING TOOL

Ø9.5x5Wxu3x30NLx6SHx65 OAL SC T CUTTER UN-COATED

Ø3x4°x21FLx6SHx50 OAL SC TAPER ENDMILL UN-COATED

Ø6.46x30FLx8SHx65 OAL SC REAMER WITH COATING

Ø12x3°x23.7FLx12SHx75 OAL SC TAPER ENDMILL UN-COATED

Ø11x50FLx12SHx90 OAL SC DRILL UN-COATED

Ø8.5x40FLx9SHx80 OAL SC DRILL UN-COATED

Ø1.5x3FLx1.4x10NLx4SHx50 OAL SC BAL MILL FOR ALU

Ø7.35x60FLx8SHx100 OAL SC DRILL FOR ALU

Ø7.35x35FLx8SHx75 OAL SC DRILL FOR ALU

Ø10x40FLx10SHx100 OAL SC HOLEMILL WITH COATING

Ø11.1x25FLx12SHx65 OAL SC DRILL WITH COATING FOR SS

Ø7.87x25FLx10SHx65 OAL SC DRILL COATED

Ø9.9x60FLx10SHx105 OAL SC DRILL WITH COATING

Ø6x30CLx8SHx60 OAL SC WOODROUGH CUTTER

Ø9.15x33FLx10SHx60 OAL SC REAMER UN-COATED FOR ALU

Ø3.95x5Lx180°x5H7x12Lx6SHx120 OAL SC SPOT FACE DRILL

ØMIN4x2Wx0.1Rx1.5Hx10Lx8SHx50 OAL SC ID GROOVING TOOL

Ø3.95x5Lx180°x5H7x12Lx8SHx120 OAL SC SPOT FACE DRILL

ØMIN6.5x3Wx0.5Rx2.5Hx25Lx10SHx50 OAL SC ID GROOVING TOOL WITH COATING

Ø20x50FLx20SHx100 OAL SC ENDMILL WITH DURANA COATING

Ø7H7x40FLx8SHx80 OAL SC REAMER UN-COATED FOR ALU

IASPL-Ø12x60FLxR1.0x12SHx150 OAL SC BULL MILL WITH COATING

IASPL-Ø16x60FLxR1.0x16SHx150 OAL SC BULL MILL WITH COATING

IASPL-Ø20x60FLx20SHx200 OAL SC FLAT MILL WITH COATING

IASPL-Ø20x60FLx20SHx200 OAL SC FLAT MILL

IASPL-Ø20x60FLxR1.0x20SHx200 OAL SC BULL MILL

IASPL-Ø16x60FLx16SHx200 OAL SC FLAT MILL

IASPL-Ø16x60FLxR1.0x16SHx200 OAL SC BULL MILL

Ø9.45x50FLx10SHx90 OAL SC DRILL UN-COATED FOR ALU

Ø9.67x50FLx0.2Rx10SHx 90 OAL SC HOLE MILL UN-COATED FOR ALU

Ø7.74x30FLx.2Rx60NLx8SHx100 OAL SC HOLE MILL UN-COATED FOR ALU

Ø7.55x30FLx60NLx8SHx100 OAL SC DRILL UN-COATED FOR ALU

Ø10x5Wx2Hx45Lx10SHx80 OAL SC I D GROOVING TOOL

Ø8x1Wx2Hx6Lx8SHx60 OAL SC ID GROOVING TOOL

Ø6x20FLx0.5Rx6SHx50 OAL SC BULL MILL WITH COATING YG MAKE

Ø8x25FLx0.5Rx8SHx60 OAL SC BULL MILL WITH COATING

Ø12x30FLx12SHx80 OAL SC Z2 ENDMILL

Ø6x20FLx6SHx60 OAL SC BALL MILL

Ø3.5x25FLx4SHx80 OAL SC DRILL

Ø2.5x18FLx4SHx60 OAL SC DRILL

Ø2.5x4x40 HSS CD

Ø8x45°x8SHx50 OAL SC CHF TOOL

Ø1.0x3FLx4SHx50 OAL SC Z2 ENDMILL

Ø2.0x6FLx4SHx50 OAL SC Z2 ENDMILL

Ø4x5FLx4SHx50 OA SC Z2 ENDMILL

Ø10x0FLx10SHx75 OAL SC Z2 ENDMILL

Ø2x8FLx4SHx40 OAL SC FLAT ENDMILL

Ø4+/-0.01x35FLx4SHx80 OAL SC REAMER WITH COATING

Ø12x40FLx0.3Rx12SHx80 OAL S C BULL MILL WITH DURANA COATED

CARBIDE REAMER

CRABIDE DRILL

HEXAGON PUNCHING TOOL 2.77/3.02x5Lx6SHx35 OAL

Ø4x15FLx4SHx50 OAL SC SLOT DRILL

Ø2x5FLx15RLx4SHx50 OAL SC SPL SLOT DRILL

Ø5x20FLx0.5Rx5SHx60 OAL SC BULL MILL

Ø14x70FLx14SHx120 OAL SC DRILL WALTER MAKE

Ø8.5x125FLx10SHx150 OAL SC T/C DRILL WITH COATING FOR SS

Ø2.65x21FLx4SHx57 OAL SC DRILL WITH COATING FOR SS

CARBIDE SLITTING CUTTER Ø100x1.3Wx31.75xT-60

CARBIDE SLITTING CUTTER Ø100x1.6Wx31.75xT-60

CARBIDE SLITTING CUTTER Ø100x1.7Wx31.75xT-60

Ø14x6.4Rx25FLx14SHx65 OAL SC RADIUS TOOL WITH COATING

Ø10x10FLx9.9x60NLx10SHx100 OAL SC HOLEMILL WITH COATING

Ø8.3x40FLx10SHx80 OAL SC DRILL WITH COATING

Ø7.87x25FLx10SHx65 OAL SC DRILL COATED

Ø6.5x1.7Wx0.2Rx30°x7SHx50 OAL SC FORM TOOL RH

Ø3.64x0.4Rx48°x4SHx50 OAL SC DOVETAIL CUTTER

Ø5x20FLx5SHx50 OAL SC Z1 ROUTER

Ø12x40FLx12SHx100 OAL SC Z1 ROUTER

Ø10x40FLx10SHx100 OAL SC Z1 ROUTER

Ø8x40FLx8SHx100 OAL SC Z1 ROUTER

Ø7.2x30FLx20RLx8SHx80 OAL SC DRILL

Ø5.06x30FLx20RLx5SHx80 OAL SC DRILL

Ø4.56x30FLx20RLx5SHx80 OAL SC DRILL

Ø51 TCMT16T308 BACK SPOT FACE TOOL

Ø40 TCMT110204 BACK SPOT FACE TOOL

Ø36 TCMT110204 BACK SPOT FACE TOOL

Ø15.8x16x120 BACK SPOT FACE TOOL HOLDER

Ø10x15FLx10SHx60 OAL SC BALL MILL WITH COATING

Ø6x0.5Rx20FLx6SHx60 OAL SC BULLMILL WITH COATING

Ø3.1x15FLx5SHx60 OAL SC ENDMILL WITH COATING

Ø3.502x15FLx5SHx60 OAL SC REAMER WITH COATING

Ø3.48x15FLx5SHx60 OAL SC DRILL WITH COATING

Ø2.6x15FLx4SHx50 OAL SC DRILL WITH COATING

Ø3.4x15FLx5SHx50 OAL SC REAMER WITH COATING

Ø3.35x15FLx5SHx50 OAL SC DRILL WITH COATING

Ø6x90°x6SHx60 OAL SC ENDRAVING TOOL WITH COATING

Ø6x20FLx0.8Rx6SHx75 OAL SC BULL MILL WITH COATING

Ø4.05 & Ø6.05 REAMERS OD CONVERTION

Ø6.5x1.6Wx4x10NLx6SHx60 OAL SC T CUTTER WITH COATING FOR ALU

Ø6.5x1.4Wx4x10NLx6SHx60 OAL SC T CUTTER WITH COATING FOR ALU

Ø6x90°x6SHx75 OAL SC CHF DRILL WITH COATING

Ø3x12FLx0.5Rx6SHx50 OAL SC BULL MILL WITH COATING

W O NO; 3860 GROOVING TOOL AS PER DRW. 4x60°x75

CCMT INSERTS CONVERTION

ØMIN5x20Lx6SHx50 OAL SC RH BORING BAR COATED

Ø5.05x3FLx82°xØ9.14x5FLx10SHx50 TL SC STEP DRILL

Ø5.6x40FLx6SHx80 OAL SC DRILL WITH COATING

Ø8.05x40FLx8SHx80 OAL SC REAMER WITH COATING

Ø5.77x40FLx6SHx80 OAL SC REAMER COATED

Ø5G9x20FLx6SHx60 OAL SC REAMER WITH COATING

Ø4.8x20FLx6SHx60 OAL SC DRILL WITH COATING

Ø6.1x20FLx6SHx60 OAL SC REAMER WITH COATING

Ø5.9x20FLx6SHx60 OAL SC DRILL WITH COATING

Ø5.5x20FLx6SHx60 OAL SC REAMER WITH COATING

Ø5.3x20FLx6SHx60 OAL SC DRILL WITH COATING

Ø6.5x20FLx8SHx60 OAL SC REAMER WITH COATING

Ø6.3x20FLx8SHx60 OAL SC DRILL WITH COATING

Ø5.2x20FLx6SHx60 OAL S REAMER COATED

Ø5.05x20FLx6SHx60 OAL SC DRILL COATED

Ø8.1x40FLx8SHx75 OAL SC REAMER UN-COATED

Ø6.8x40FLx8SHx80 OAL SC DRILL WITH COATING

Ø8.3x35FLx8SHx75 OAL SC REAMER WITH COATING

Ø16x40FLx55NLx16SHx80 OAL SC ROUGH END MILL

Ø6.75x78FLx8SHx120 OAL SC HOLE MILL WITH COATING

Ø5.8x35FLx6SHx75 OAL SC HOLEMILL WITH COATING

Ø6.37x35FLx8SHx75 OAL SC DRILL WITH COATING

Ø5.6x35FLx6SHx75 OAL SC DRILL WITH COATING

Ø6.6x72FLx8SHx120 OAL SC DRILL WITH COATING

Ø6.2x35FLx8SHx75 OAL SC DRILL WITH COATING

Ø16x45°x16SHx65 OAL SC CHF TOOL WITH COATING

Ø12.5x50FLx12SHx85 OAL SC DRILL WITH COATING FOR SS

Ø3x4.4ST/Lx60°x8SHx80 OAL SC CENTER DRILL D/EDGE

Ø4x0.5Rx15FLx4SHx50 OAL SC BULL MILL

Ø5x20FLx5SHx50 OAL SC DRILL

Ø6.35x20FLx6.5SHx65 OAL SC BALL MILL

Ø3.45x90°x5.56x6SHx100 OAL SC STEP DRILL

Ø4.5x55FLx45SHx100 OAL SC DRILL

Ø12x2.3Wx4Hx10Lx12SHx65 OAL SC ID GROOVING TOOL WITH COATING

Ø16xR2.0 R/S ONLY

Ø10.8x30FLx12SHx65 OAL SC DRILL WITH DURANA COATED

Ø7.46x35FLx8SHx80 OAL SC DRILL WITH DURANA COATED

Ø8x20FLx8SHx100 OAL SC BALLMILL FOR ALU

Ø8x30FLx0.8Rx8SHx75 OAL SC BULLMILL FOR ALU

Ø12x35FLx0.8Rx12SHx120 OAL SC BULL MILL FOR ALU

Ø16x40FLx1.0Rx16SHx150 OAL SC BULL MILL FOR ALU

Ø16x40FLx0.75Rx16SHx150 OAL SC BULL MILL FOR ALU

Ø16x.5Wx6x28NLx8SHx64 OAL SC T CUTTER

Ø6H6x40FLx6SHx100 OAL SC REAMER WITH COATING

5x5x150 SC FLAT

Ø2.5x10°x2.5Lx1.6NLx4SHx50 OAL SC DOVETAIL CUTTER

Ø12x20°x12SHx100 OAL SC CHF TOOL WITH COATING

Ø6H7x25FLx6SHx75 OAL SC REAMER WITH COATING

Ø6x45° CHF TOOL WITH COATING

Ø7H8x15FLx8SHx50 OAL SC HOLEMILL WITH COATING

Ø12.2x80FLx14SHx120 OAL SC DRILL WITH COATING

Ø12.6x50FLx14SHx80 OAL SC DRILL WITH COATING

Ø14.3x50FLx16SHx80 OAL SC DRILL WITH COATING

Ø9.5x50FLx10SHx105 OAL SC DRILL WITH COATING

Ø12.7x70FLx14SHx110 OAL SC DRILL WITH COATING

Ø8x60FLx8SHx105 OAL SC DRILL WITH COATING

Ø10x70FLx10SHx110 OAL SC DRILL WITH COATING

Ø4.8x35FLx6SHx75 OAL SC DRILL WITH COATING

Ø5.8x25FLx1.0Rx6SHx75 OAL SC BULL MILL WITH COATING

Ø12x25FLx75NLx12SHx120 OAL SC ENDMILL FOR ALU

Ø9.5x5Lx45°x10SHx95 OAL SC BACK CHF TOOL WITH COATING

Ø10x56°x10SHx65 OAL SC CHF TOOL WITH COATING

Ø8.5x35FLx8SHx75 OAL SC DRILL WITH COATING

Ø8.18x35FLx8SHx75 OAL SC HOLE MILL WITH COATING

Ø1.5x5FLx3SHx39 OAL SC Z4 BALL MILL WITH COATING

Ø8x80CLx8SHx125 OAL SC WOODROUGH CUTTER

Ø8x2CLx8SHx70 OAL SC WOODROUGH CUTTER

Ø4x90°x4SHx100 OAL SC CHF TOOL

Ø10x4Wx4SHx65 OAL SC T CUTTER UN-COATED

Ø17.5x70FLx18SHx110 OAL SC T/C DRILL WITH COATING

Ø12.2x80FLx14SHx120 OAL SC T/C DRILL WITH COATING

Ø12.6x50FLx14SHx80 OAL SC T/C DRILL WITH COATING

Ø14.3x50FLx16SHx80 OAL SC T/C DRILL WITH COATING

Ø9.5x50FLx10SHx105 OAL SC T/C DRILL WITH COATING

Ø12.7x70FLx14SHx110 OAL SC T/C DRILL WITH COATING

Ø8x60FLx8SHx100 OAL SC T/C DRILL WITH COATING

Ø10x70FLx10SHx110 OAL SC T/C DRILL WITH COATING

Ø8x5FLx8SHx75 OAL SC DRILL WITH COATING FOR SS

Ø8x0.5Rx25FLx8SHx75 OAL SC BULL MILL WITH COATING FOR SS

Ø9x5Lx45°x5.5x35NLx9SHx75 OAL SC BACK CHF TOOL WITH COATING FOR SS

Ø3.95x35FLx4SHx75 OAL SC DRILL WITH COATING FOR SS

Ø10x0.8Rx35FLx10SHx75 OAL SC BULL MILL UN-COATED FOR ALU

Ø6.52x35FLx8SHx75 OAL SC DRILL UN-COATED FOR ALU

CARBIDE GROOVING TOOL

CARBIDE END MILL

Ø10x25FLx44NLx10SHx80 OAL SC END MILL WITH COATING

Ø16x35FLx75NLx16SHx120 OAL SC ENDMILL WITH COATING

Ø11.12x25FLx12SHx65 OAL SC BALLMILL WITH COATING

Ø13.6x0FLx14SHx75 OAL SC DRILL WITH COATING

Ø21.8x40FLx120NLx20SHx150 OAL SC DRILL WITH COATING

Ø22x20FLx120NLx20SHx150 OAL SC HOLE MILL WITH COATING

Ø8x28°x8SHx64 OAL SC CHF TOOL WITH COATING

Ø8x45°x8SHx64 OAL SC CHF TOOL WITH COATING

Ø8.55x30FLx10SHx80 OAL SC DRILL WITH COATING

Ø16x6°INLx55 FL TAPER END MILL NEW MAKING AND COATING

Ø3.05x30FLx3.05x50 SC DRILL UN-COATED

Ø6x10ST/LxØ11x70FLx14SHx125 OAL SC STEP DRILL UN-COATED

Ø5x15FLx5SHx50 OAL SC BALL MILL UN-COATED

Ø5.5x45FLx6SHx80 OAL SC DRILL WITH COATING

Ø7.6x40FLx8SHx80 OAL SC DRILL WITH COATING

Ø7.018x30FLx8SHx80 OAL SC REAMER WITH COATING

Ø4.01x25FLx4SHx65 OAL SC REAMER WITH COATING

Ø4.3x35FLx6SHx75 OAL SC DRILL WITH COATING

Ø3.8x35FLx4SHx75 OAL SC DRILL WITH COATING

Ø3.4x30FLx4SHx75 OAL SC DRILL WITH COATING

Ø6.7x60FLx8SHx110 OAL SC DRILL WITH COATING

Ø1.3x6FLx0.2Rx4SHx40 OAL SC BULL MILL COATED

Ø7x60°x4x15NLx7SHx50 OAL SC THREADING TOOL WITH COATING FOR ALU

Ø8x25FLx8SHx86 OAL SC HOLEMILL WITH COATING FOR TITANIUM

Ø6x30FLx0.5Rx6SHx75 OAL SC BULL MILL UN-COATED FOR ALU

Ø4x30FLx4SHx80 OAL SC ENDMILL FOR ALU

Ø10x40FLx10SHx80 OAL SC Z2 BALLMILL FOR ALU

Ø16H6x35FLx120°x16SHx75 OAL S CCHF HOLE MILL WITH COATING

Ø6.75x78FLx8SHx120 OAL SC HOLE MILL WITH COATING

Ø5.8x35FLx6SHx75 OAL SC HOLEMILL WITH COATING

Ø6.37x35FLx8SHx75 OAL SC DRILL WITH COATING

Ø5.6x35FLx6SHx75 OAL SC DRILL WITH COATING

Ø6.6x72FLx8SHx120 OAL SC DRILL WITH COATING

Ø6.2x35FLx8SHx75 OAL SC DRILL WITH COATING

Ø7.7x35FLx8SHx75 OAL SC DRILL WITH COATING

Ø16x45°x16SHx100 OAL SC CHF TOOL D/EDGE WITH COATING FOR SS

Ø12.5x50FLx12SHx85 OAL SC DRILL WITH COATING FOR SS

Ø2.24x1.51°x19FLx2.49x4SHx50 OAL SC TAPER ENDMILL

Ø2x1.51°x10FLx2.49x4SHx50 OAL SC TAPER ENDMILL

WO- 3704 FORM TOOL AS PER DRW

Ø6.706x21.9ST/Lx45°xØ17.42x40FLx16SHx105 OAL SC STEP DRILL .

Ø6.706x21.9ST/Lx45°xØ17.2x40FLx16SHx105 OAL SC STEP DRILL .

Ø3.8x31.6°INCLx2.5x2.5NLx4SHx40 OAL SC DOVETAIL CUTTER UN-COATED

Ø3.8x31.6°INCLx2.5x2.5NLx4SHx40 OAL SC DOVETAIL CUTTER UN-COATED

12x12x28° SPL HOLDER

12x12x30° SPL HOLDER

12x12x43° SPL HOLDER

12x12x58° SPL HOLDER

Ø32x33.3Lx18SHx90 OAL CT FORM CUTTER

Ø3.3x6ST/Lx45°x8SHx75 OAL SC STEP DRILL

CARBIDE SLITTING CUTTER Ø100x2Wx31.75xT-60

CARBIDE SLITTING CUTTER Ø100x2Wx31.75xT-60

25x40x4 WIRE CUTTING SOLID CARBIDE BLADE

Ø10x30FLx10SHx75 OAL SC ENDMILL WITH COATING FOR SS

ØMIN 20x4Wx4Hx23Lx20SHx80 OAL LC OD UNDER CUT TOOL WITH COATING

Ø9.91z10°x3.0Rx10.83Lx6x2.5NLx10SHx80 OAL SC DOVETAIL CUTTER

ØMIN 10x10°x5.08Wx3.9Hx23Lx10SHx60 OAL SC OD PROFILE UNDER CUT TOOL WITH COATING FOR SS TOOL

ØMIN 10x10°x5.08Wx3.9Hx23Lx10SHx60 OAL SC OD PROFILE UNDER CUT TOOL WITH COATING FOR SS TOOL

Ø4.78x30FLx6SHx70 OAL SC HOLEMILL FOR ALU

Ø7.14x30FLx8SHx65 OAL SC DRILL UN-COATED FOR ALU

Ø16x3.175Wx8SHx80 OAL SC T CUTTER UN-COATED FOR ALU

Ø10x100 PCD END MILL

Ø4.06x25FLx6SHx65 OAL SC REAMER WITH COATING FOR SS

Ø4.78x25FLx6SHx75 OAL SC HOLE MILL WITH CIATING FOR SS

Ø3.96x35FLx6SHx75 OAL SC DRILL UN-COATED FOR ALU

Ø6.68x7SHx42 OAL SC ACME THREADING TOOL WITH COATING

ØMIN 10x10°x5.08Wx3.9Hx23Lx10SHx60 OAL SC OD PROFILE UNDER CUT TOOL WITH COATING FOR SS

ØMIN 10x10°x5.08Wx3.9Hx23Lx10SHx60 OAL SC OD PROFILE UNDER CUT TOOL WITH COATING FOR SS

Ø20x60°x20SHx75 OAL SC CHF TOOL

Ø6.5x2Wx2.5Hx16Lx8SHx50 OAL RH SC GROOVING TOOL WITH COATING

ØMIN3x8Lx8SHx50 OAL SC BORING TOOL WITH COATING

Ø8x45°x8SHx55 OAL SC CHF TOOL WITH COATING

25x25x185 BURNISHING WHEEL SPL HOLDER

Ø60x6MM ROUND BURNISHING WHEEL

Ø6.3x15FLx6SHx60 OAL SC HOLEMILL

Ø3.2x6ST/Lx45°x8SHx60 OAL SC STEP DRILL

Ø4.906x50 OAL SC GAUGE PIN

WO NO; 3534 TURNING GROOVING TOOL AS PER DRW WITH MATIRIAL

Ø3x12FLx4SHx40 OAL SC REAMER UN-COATED FOR ALU

3MM GROOVING INSERTS NEW FOR TEGUETEC HOLDER

WNMG 08 5MM SHIM

2525 WNMG LH TOOL HOLDER

Ø100x1.7Wx31.75IDxT60 SC SLITTEING CUTTER

Ø100x1.6Wx31.75IDxT60 SC SLITTING CUTTER

Ø100x1.2Wx31.75IDxT60 SC SLITTING CUTTER

Ø3.9x30FLx6SHx60 OAL SC DRILL WITH COATING FOR SS

Ø4.07x25FLx6SHx60 OAL SC REAMER WITH COATING FOR SS

Ø100x2Wx31.75IDxT60 SC SLITTING CUTTER

Ø100x2Wx31.75IDxT60 SC SLITTING CUTTER

DMIN 15xTMAX-6Hx35WLx16SHx90 OAL LH GX-09-3MM ID GROOVING TOOL HOLDER

ØMIN 15.0x3Wx6Hx35WLx16SHx80 OAL SC LH ID GROOVING TOOL WITH COATING

Ø15.5x65FLx16SHx110 OAL SC DRILL WITH COATING

Ø6.8x60FLx8SHx180 OALSC DRILL WITH COATING

Ø8.5x60FLx10SHx180 OAL SC DRILL WITH COATING

Ø10.2x60FLx12SHx180 OAL SC DRILL WITH COATING

Ø19x60FLx20SHx110 OAL SC DRILL WITH COATING

3MMx56x0.254R SPL GROOVING INSERT WITH COATING

Ø16 INDEXEBLE ENDMILL WITH INSERT TYPE 185WLx250 OAL

Ø8x1.0R50FLx170NLx8SHx200 OAL SC ENDMILL UN-COATED

Ø8x1.0R50FLx170NLx8SHx200 OAL SC ENDMILL UN-COATED

Ø8x50FLx170x8SHx200 OAL SC ENDMILL UN-COATED

Ø6x135WLx6SHx200 OAL SC FLAT DRILL UN-COATED

Ø12x180WLx12SHx210 OAL SC FLAT DRILL UN-COATED

Ø27 OR 30MM INSERT TYPE CUTTER STD

Ø10x1.0Rx30FLx9.8NLx10SHx200 OAL SC BULL MILL UN-COATED

Ø10x1.0Rx15FLx9.8NLx10SHx130 OAL SC BULL MILL UN-COATED

Ø2.1x5FLx6SHx200 OAL SC DRILL UN-COATED

Ø3.2x5FLx6SHx200 OAL SC DRILL UN-COATED

Ø2.5x15FLx6SHx200 OAL SC DRILL UN-COATED

Ø12x0CLx180NLx12SHx225 OAL SC Z3 ENDMILL UN-COATED

Ø12x50CLx120NLx12SHx175 OAL SC Z3 ENDMILL UN-COATED

Ø6x45°x6SHx220 OAL SC CHAMFER TOOL UN-COATED

Ø5.1x30FLx3.1NLx6SHx70 OAL SC HOLEMILL UN-COATED

Ø6.3x30FLx8SHx200 OAL SC DRILL UN-COATED

Ø2.55x20FLx6SHx200 OAL SC DRILL UN-COATED

Ø12x12x75 OAL SC STD ENDMILL

Ø10x10x75 OAL SC STD ENDMILL

Ø8x8x60 SC STD ENDMILL

Ø6x6x50 SC STD ENDMILL

Ø5x5x50 OAL SC STD ENDMILL

Ø4x4x50 OAL STD SC ENDMILL

Ø3x4x50 OAL SC STD ENDMILL

Ø2x4x50 SC STD ENDMILL

Ø8x25CLx7.8x180NLx8SHx220 OAL SC Z3 ENDMILL UN-COATED

Ø8x25CLx7.8x180NLx8SHx220 OAL SC Z3 ENDMILL UN-COATED

Ø8x25CLx7.8x135NLx8SHx175 OAL SC Z3 ENDMILL UN-COATED

Ø8x25CLx7.8x80NLx8SHx125 OAL SC Z3 ENDMILL UN-COATED

Ø8x20CLx7.8x45NLx8SHx75 OAL SC Z3 ENDMILL UN-COATED

Ø6x25CLx5.9x180NLx6SHx220 OAL SC Z3 ENDMILL UN-COATED

Ø6x25CLx5.9x135NLx6SHx175 OAL SC Z3 ENDMILL UN-COATED

Ø6x25CLx5.9x80NLx6SHx125 OAL Z3 SC ENDMILL UN-COATED

Ø6x20FLx5.9x45NLx6SHx80 OAL Z3 SC ENDMILL UN-COATED

Ø10x22FLx9.5x140 NLx10SHx175 OAL SC Z3 ENDMILL UN-COATED

Ø10x22FLx9.5x180NLx10SHx225 OAL SC Z3 ENDMILL UN-COATED

Ø16x32FLx15.5x140NLx16SHx175 OAL SC Z3 ENDMILL UN-COATED

Ø16x32FLx15.5x180NLx16SHx225 OAL SC Z3 ENDMILL UN-COATED

Ø12x32FLx15.5x150NLx16SHx175 OAL SC Z3 ENDMILL UN-COATED

Ø12x32FLx15.5x180NLx16SHx225 OAL Z3 SC ENDMILL UN-COATED

Ø2.5x10FLx5.3NLx6SHx228 OAL SC DRILL UN-COATED

Ø2.2x10FLx5.3NLx6SHx227 OAL SC DRILL UN-COATED

Ø5.1x10FLx5.3NLx6SHx55 OAL SC DRILL UN-COATED

HYDROGRIP COLLETS 2 TO 16

HYDRO GRIP HOLDER KIT (HOLDER + 5 COLLECTS)

Ø6.5x75.9°x20FLx8SHx105 OAL SC DRILL UN-COATED

Ø6.5x9.5SLx45°xØ10.5x15FLx12SHx110 OAL SC STEP DRILL UN-COATED

6.2x9ST/Lx45°x10.2x4SLx45°x25FLx12SHx105 OAL SC STEP DRILL CAOTED STEP DRILL

Ø9x25FLx12SHx110 OAL SC REAMER UNCOATED

Ø8.12x3.2ST/Lx45°xØ9x20FLx12SHx100 OAL SC STEP DRILL COATED

Ø3.9x35FLx6SHx75 OAL SC DRILL UN-COATED FOR ALU

Ø11.45x60FLx12SHx145 OAL SC DRILL UN-COATED FOR ALU

Ø20x10.88°INCLx66FLx20SHx110 OAL SC TPR ENDMILL UN-COATED FOR ALU

Ø2.3x4FLx4SHx50 OAL SC BALLMILL UN-COATED FOR ALU

Ø1.59x12(45)FLx4SHx80 OAL SC DRILL UN-COATED FOR ALU

Ø0.5x7FLx4SHx40 OAL SC ENDMILL FOR ALU

Ø6.42x35FLx8SHx75 OAL SC REAMER UN-COATED FOR ALU

Ø4.2x38FLx6SHx80 OAL SC DRILL UN-COATED FOR ALU

Ø3.3x20FLx4SHx65 OAL SC DRILL UN-COATED FOR ALU

Ø6x44FLx6SHx80 OAL SC ENDMILL WITH COATING FOR SS

Ø16x32FLx16SHx92 OAL SC ROUGHER ENDMILL COATED

Ø5x27FLx44NLx5SHx80 OAL SC ENDMILL WITH COATING FOR SS

Ø7x90°x7SHx80 OAL SC CHF TOOL UN-COATED FOR ALU

Ø6x30FLx45NLx8SHx80 OAL SC ENDMILL UN-COATED FOR ALU.

WO- NO; 3361 TURNING GROOVING TOOL AS PER DRW WITH MATIRIAL

6 NOS WITHOUT REGRINDING

Ø12x30FLx0.6Rx12SHx75 OAL SC BULL MILL WITH COATED

Ø12x30FLx0.3Rx12SHx75 OAL SC BULL MILL WITH COATED

Ø25x4.25Wx12SHx75 OAL HSS T CUTTER

Ø3x15FLx3SHx50 OAL SC ENDMILL COATED

Ø8x70°INCLx8SHx70 OAL SC CHF TOOL WITH COATING FOR SS

Ø6x0.4Rx20FLx6SHx60 OAL SC BULL MILL WITH COATING FOR SS

Ø3x0.4Rx20FLx4SHx60 OAL SC BULL MILL WITH COATED FOR SS

Ø2.5x10FLx4SHx65 OAL SC REAMER UN-COATED FOR ALU

Ø2.05x20FLx4SHx65 OAL SC BALL MILL UN-COATED FOR ALU.

Ø2.48x30FLx4SHx70 OAL SC DRILL UN-COATED FOR ALU.

KORBLADE APKT 160408 F100 PCD INSERTS (APGT160408 PCD INSERTS)(BMC-T-35)PROJECT; TRAY, GAUGE PLAT, ARM.

Ø1.5x4FLx4SHx50 OAL SC FLAT MILL WITH COATING SPT

Ø6x15FLx6SHx50 OAL SC ENDMILL DAIMOND COATED

Ø8x20FLx8SHx60 OAL SC ENDMILL DAIMOND COATED

Ø3.2x30FLx190NLx6SHx230 OAL SC HOLEMILL UN-COATED FOR ALU

Ø3.2x30FLx190NLx6SHx230 OAL SC HOLEMILL UN-COATED FOR ALU

Ø3.1x30FLx100NLx6SHx150 OAL SC DRILL UN-COATED FOR ALU

ØMIN5x20Lx6SHx50 OAL SC LH BORING TOOL WITH COATING

ØMIN4x23Lx6SHx50 OAL SC LH BORING TOOL WITH COATING

Ø6.6x23(30)FLx8SHx130 OAL SC HOLEMILL WITH COATING

Ø7x60FLx8SHx125 OAL SC HOLEMILL WITH COATED

Ø12x30FLx12SHx150 OAL 90° SC CHF ENDMILL Z4 COATED

Ø10.2x55FLx12SHx103 OAL SC DREAM DRILL WITH COATED

WNMG PCD INSERTS NEW

T6-R3 DNMG INSERTS NEW

2525 DNMG RH FACE GROOVING TOOL HOLDER

KNURLING WHEEL SPL 6.85 WIDTH

KNURLING TOOL HOLDER SPL

16x16x100 SPL CT PROFILE TOOL

Ø26.7xØ32.6x15°x1.88L SPMW & TCMT INSERT SPL HOLDER

Ø5x25FLx6SHx65 OAL SC ENDMILL WITH COATING FOR SS

Ø12x30FLx12SHx75 OAL SC ENDMILL WITH COATING

Ø12x30FLx12SHx75 OAL SC ENDMILL WITH COATING

Ø4.8x35FLx6SHx75 OAL SC DRILL WITH COATING FOR SS

Ø8.4x60FLx10SHx105 OAL SC DRILL WITH COATING FOR SS

Ø7.96x40FLx8SHx80 OAL SC DRILL WITH COATING FOR SS

Ø4.77x40FLx6SHx80 OAL SC HOLE MILL WITH COATING FOR SS

Ø4.77x40FLx6SHx80 OAL SC HOLE MILL WITH COATING FOR SS

Ø4.6x30FLx6SHx60 OAL SC DRILL WITH COATING FOR SS

Ø11.1x32FLx12SHx75 OAL SC DRILL WITH COATING FOR SS

Ø8.15x40FLx8SHx80 OAL SC HOLE MILL WITH COATING FOR SS

Ø10x1.0Rx3°x5.5FLx10SHx60 OAL SC FORM TOOL FOR ALU

Ø6x4.869Wx2.5Rx2.6x12NLx6SHx75 OAL SC LOLYPOP CUTTER FOR ALU

APGT 160408 PCD INSERTS NEW

ØMIN3x7°x22FLx8SHx75 OAL SC TAPER ENDMILL WITH COATING

PCD INSERTS

CBN INSERTS

CBN INSERTS

Ø10x14Lx120°xØ16x13Lx30°x17.5x16.5Lx30°xØ18.5x11.1Lx30°x45°x15°x21.8x20SHx130 OAL SC STEP FORM TOOL WITH COATING

Ø10x14Lx120°xØ16x13Lx30°x17.5x16.5Lx30°xØ18.5x11.1Lx30°x45°x15°x21.8x20SHx110 OAL SC STEP FORM TOOL WITH COATING

Ø10x14Lx120°xØ16x13Lx30°x17.5x16.5Lx30°xØ18.5x11.1Lx30°x45°x15°x21.8x20SHx130 OAL SC STEP FORM TOOL WITH COATING

Ø20x75FLx20SHx150 OAL SC ENDMILL WITH COATING YG MAKE

Ø20x75FLx20SHx150 OAL SC ENDMILL WITH COATING YG MAKE

IASPL CRSNR SHIM

IASPL CRSNR- RCGX 32x32x12 TOOL HOLDER

IASPL ØMIN 9.5x7.5x150 CCMT-06 BORING TOOL LH

IASPL ØMIN 9.5x7.5x150 CCMT-06 BORING TOOL LH

IASPL RCGX 32x32x23.5° TOOL HOLDER

IASPL RCGX 32x32x43.5° TOOL HOLDER

Ø18x75FLx18SHx150 OAL SC ENDMILL FULL R/S & DURANA COATING

Ø8x50°x8SHx75 OAL SC CHF TOOL WITH COATING.(T-410)

Ø6.4x40FLx8SHx80 OAL SC HOLE MILL WITH COATING. (T-388)

Ø6.3x30FLx8SHx75 OAL SC DRILL UN-COATED FOR ALU. (T-1035)

Ø4.0x60FLx6SHx115 OAL SC DRILL UN-COATED FOR ALU. (T-1034)

Ø3.8x60FLx6SHx115 OAL SC DRILL UN-COATED FOR ALU. (T-1033)

Ø6.64x40FLxØ8x50NLx10SHx180 OAL SC DRILL WITH COATING

ØMIN3.0x65°x7.1x3Lx8SHx50 OAL SC FORM REWORK TOOL

Ø10.001x50L GO Ø10.022x50L NO-GO GAUGE PIN WITH HANDLE

Ø3.02x20FLx5SHx60 OAL SC REAMER UN-COATED FOR ALU. (T-1051)

Ø5x40FLx5SHx100 OAL SC BALL MILL UN-COATED FOR ALU

Ø5x40FLx5SHx100 OAL SC FLAT MILL UN-COATED FOR ALU

Ø10x25FLx10SHx70 OAL SC REAMER UN-COATED FOR ALU

Ø11.8x25FLx12SHx70 OAL SC HOLE MILL WITH COATING FOR TITATIUM

Ø11.8x25FLx12SHx70 OAL SC HOLE MILL WITH COATING FOR TITATIUM

Ø7.94x30FLx8SHx75 OAL SC BALLMILL UN-COATED FOR ALU. (T-1057)

Ø12x3.5Rx30FLx12SHx75 OAL SC BULL MILL UN-COATED FOR ALU. (T-1056)

Ø4x15FLx4SHx50 OAL SC ENDMILL UN-COATED FOR ALU. (T-1055)

Ø12x4.0Rx30FLx12SHx75 OAL SC BULLMILL UN-COATED FOR ALU. (T-1054)

Ø3x1.58Rx10FLx5SHx50 OAL SC BALLMILL UN-COATED FOR ALU. (T-1053)

Ø3.7x20FLx5SHx75 OAL SC DRILL UN-COATED FOR ALU. (T-1052)

Ø11x40FLx12SHx80 OAL SC ENDMILL WITH COATING

RDKW-6 ROUND INSERTS

Ø90x6WxR3.0x25SHx125 OAL CT " T " CUTTER

2525 RDKW-6 TOOL HOLDER

Ø4.9x5Lx3.2x16NLx6SHx75 OAL SC BACK CHF TOOL WITH COATING FOR SS. (T-1050)

Ø6.4x5Lx45°x4.2x16NLx8SHx75 OAL SC BACK CHF TOOL WITH COATING FOR SS. (T-1049)

Ø5.62x25FLx6SHx65 OAL SC ENDMILL WITH COATING

Ø4.875x4°INCLx1.5 IRx3.325Lx10SHx65 OAL SC IR TOOL UN-COATED FOR ALU

Ø4.875x4°INCLx1.5 IRx3.325Lx10SHx65 OAL SC IR TOOL UN-COATED FOR ALU

Ø6.4x40FLx8SHx80 OAL SC HOLEMILL WITH COATING FOR SS(T-388)

Ø5.15x20FLx6SHx65 OAL SC BALLMILL WITH COATING FOR SS, (T-374)

Ø12x30FLx12SHx75 OAL SC ENDMILL WITH COATING FOR SS(T-845)

Ø5x40FLx6SHx80 OAL SC DRILL WITH COATING FOR SS. (T-373)

Ø8x20FLx8SHx75 OAL SC ENDMILL WITH COATING FOR SS(BMC-T-792)

Ø8x30FLx8SHx75 OAL SC ENDMILL UN-COATED FOR ALU. (T-544)

Ø6.35x25FLx8SHx75 OAL SC ENDMILL WITH COATING FOE SS(T-112)

Ø6.9x30FLx8SHx65 OAL SC HOLE MILL WITH COATING FOR SS(T-1000)

Ø10x30FLx10SHx75 OAL SC ENDMILL UN-COATED FOR ALU(T-543)

CNMG 5MM SHIM

Ø1.5x5FLx6SHx60 OAL SC Z2 BALL MILL UN-COATED

ØMIN3.27x45°x12SHx60 OAL SC CHF TOOL NEW MAKING & COATING

WIRE CUTTING BLADE RE-SHARPENING ONLY ONE SET

Ø12x12x123° SPL HOLDER

Ø7.05x30FLx119°x7SHx65 OAL SC REAMER

Ø8.02x30FLx8SHx65 OAL SC REAMER

2525-WNMG RH TOOL HOLDER

RESHARP NOT DON

Ø12.5x70FLx14SHx110 OAL SC DRILL WITH COATING

Ø1.12x15FLx4SHx50 OAL SC DRILL WITH DURANA COATING

Ø8xS16 DTZCL-H06 BACK CHF TOOL HOLDER

ETJNL-3232 LH HOLDER

TAEGU TECH INSERTS 3MM NEW

TNMG SHIMPIN-16

CNMG 12x6.3 SHIM

2525 3MMx16 TAEGU TECH TOOL HOLDER LH

Ø1.52x6FLx6SHx60 OAL SC Z4 ENDMILL WITH STEELCON COATING

Ø8x40FLx8SHx90°CHFx100 OAL SC CHF ENSMILL WITH COATING

ØMIN 16x3.5Hx30°x0.5Rx60WLx16SHx120 OAL SC T P THREADING TOOL

Ø13.15x30FLx13x50NLx14SHx120 OAL SC HOLE MILL UN-COATED

Ø12x3.0R R/S ONLY

u12x3.0R

CARBIDE LIP TOOL

PCD GROOVING TOOL

Ø16X16X35X90 CUT & FACE

M8 HSS TAP SET TUTOM OR MK MAKE

M6 HSS TAP SET SET TUTOM OR MK MAKE

M5 HSS TAP SET TUTOM OR MK MAKE

M4 HSS TAP SET TUTOM OR MK MAKE

M8 HSS TAP SET BIRLA MAKE

M6 HSS TAP SET SET BIRLA MAKE

M5 HSS TAP SET BIRLA MAKE

M4 HASS TAP SET BIRLA MAKE

Ø3.3 STD HSS DRILL ADDISION MAKE

Ø3.3 STD HSS-E DRILL YG MAKE

HSS PUNCHES CONVERTION ASPER DRW

M20x2.5 PITCH HSS HELICOIL TAP

Ø5x44FLx5SHx80 OAL SC ENDMILL WITH COATING FOR SS(111)

Ø3.5x30FLx5SHx60 OAL SC DRILL WITH COATING FOR SS(353)

Ø10x27FLx9.8x44NLx10SHx80 OAL SC ENDMILL WITH COATING FOR SS,(786)

Ø5x27FLx4.8x44NLx6SHx80 OAL SC ENDMILL WITH COATING FOR SS (789)

Ø6x2°x27FLx5.8x44NLx6SHx80 OAL SC TAPER ENDMILL WITH COATING FOR SS(790)

Ø8x100°x2.4SHx24 OAL HSS BACK CHF TOOL

THREAD SHANK EXTAND 10x120

THREAD SHANK EXTAND 10x120

Ø6.3x105 OAL SC ROD

Ø8.13x15FLx8SHx50 OAL SC HOLE MILL UN-COATED

IASPL-6MM 32x32 GROOVING TOOL HOLDER RH

IASPL-6MM 32x32 GROOVING TOOL HOLDER LH

RDKW-16 ROUND INSERTS NEW

Ø20x80FLx20SHx130 OAL SC 6 FLUTED ENDMILL WITH COATING

2525 RDKW-16 WL-98. TOOL HOLDER

Ø39.5x10.67Wx2.4Rx2.5°x20SHx135 OAL CT RADIUS T CUTTER

Ø15x6WxØ9x20NLx16SHx60 OAL SC T CUTTER UN-COATED

Ø22x4WxØ8x26NLx20SHx60 OAL SC T CUTTER UN-COATED

Ø4x2Wx3SHx50 OAL SC T CUTTER UN-COATED

Ø3.87x0.79Rx24°x2.28x12NLx6SHx60 OAL SC DOVTAIL CUTTER

ØMIN3.5x12Lx4SHx28 OAL SC SPL BORING TOOL WITH COATING

ØMIN6x0.25Rx20WLx6SHx50 OAL SC BORING BAR WITH COATING FOR SS.

Ø5.78x100FLx6SHx160 OAL SC HOLE MILL UN-COATED FOR ALU(974)

Ø4.5x30FLx5SHx60 OAL SC DRILL

Ø9.7x30FLxØ9.5x60NLx10SHx130 OAL SC DRILL WITH COATING

Ø9.7x60FLxØ9.5x60NLx10SHx150 OAL SC DRILL WITH COATING

Ø9.7x60FLxØ9.5x60NLx10SHx150 OAL SC DRILL WITH COATING

Ø9.78x30FLxØ9x70NLx10SHx150 OAL SC HOLE MILL WITH COATING

Ø9.0x2.5LxØ9.6x80FLx10SHx130 OAL SC STEP HOLEMILL

Ø35x16SHxRCMT-05 INSERT TYPE CUTTER

Ø32x5Wx2.5Rx16SHx90 OAL LUGGED CARBIDE RADIUS T CUTTER WITH COATING FOR SS

16ER-1.0 ISO-TCGM3225 KORBLADE CARBIDE INSERTS

ØMIN10x4Wx0.4Rx3.5Hx35Lx12SHx85 OAL SC GROOVING TOOL WITH COATING FOR SS(760)

Ø2.5x30°x6.5Lx8SHx65 OAL SC SPL BORING TOOL DOUBLE EDGE

Ø1.5x7FLx6SHx60 OAL SC Z2 ENDMILL UNCOATED

Ø4.41x4Lx120°x5.35x8x60 STEP FORM TOOL RE-CONDITIONING

Ø4.38x4Lx120°x0.25Rx5.35x6.5Lx456x8SHx65 OAL SC STEP FORM TOOL

Ø14x75WLx25SHx125 OAL CORE DRILL(952)

Ø12x30FLx11.8x40NLx12SHx120 OAL SC ENDMILL UNCOATED(978)

Ø10x30FLx9.8x40NLx10SHx120 OAL SC ENDMILL UNCOATED(977)

2525 EDJNR M12 TOOL HOLDER RH

Ø20x45° SC CHF TOOL NEW MAKING

Ø18x45° SC CHF TOOL NEW MAKING

Ø16x45° SC CHF TOOL NEW MAKING

Ø14x45° SC CHF TOOL NWE MAKING

Ø12x45° SC CHF TOOL NEW MAKING

Ø10x45° SC CHF TOOL NEW MAKING

Ø8x45° CHF TOOL NEW MAKING

Ø12x45°x12SHx100 OAL SC CHF TOOL DOUBLE EDGE

Ø10.8x50FLx12SHx80 OAL SC DRILL WITH COATING FOR SS

Ø10.8x30FLx12SHx65 OAL SC DRILL WITH COATING FOR SS

Ø40 DNMG BORING TOOL RH

Ø40 DNMG BORING TOOL LH

3232 M6T10 OD GROOVING TOOL RH

3232 M6T10 OD GROOVING TOOL LH

3232 WNMG HOLDER LH

3232 WNMG HLDER RH

3232 DNMG HOLDER RH

3232 DNMG HOLDER LH

1000MMx125MMx16x10x30° WORK REST BLADE FULL MANUFACTURING

Ø17.5x25FLx20SHx75 OAL CT NSPOT FACE TOOL

1 FLAT TETURN AS IT IS

Ø4x7ST/Lx45°x6SHx65 OAL SC STEP DRILL WITH COATING

Ø4x15FLx4SHx0.5Rx50 OAL SC BULL MILL UN-COATED FOR ALU.(BMC-T-893)

Ø4.02x30FLx6SHx75 OAL SC REAMER UN-COATED FOR ALU

Ø3.9x35FLx6SHx75 OAL SC DRILL UN-COATED FOR ALU.(BMC-T-891)

Ø14x45°x14SHx80 OAL SC CHF TOOL WITH COATING FOR SS.(BMC-T-917)

Ø4x0.5Rx20FLx4SHx50 OAL SC BULL MILL WITH COATING FOR SS.(BMC-T-914)

Ø7.94x30FLx8SHx65 OAL SC DRILL UN-COATED FOR ALU.(BMC-T-951)

Ø7.13x40FLx8SHx80 OAL SC DRILL UN-COATED FOR ALU.(BMC-T-950)

Ø10x10x60x90° SC CHF TOOL UN-COATED

Ø6.01x25(35)FLx6SHx80 OAL SC REAMER WITH DURANA COATING

Ø8.1x30(35)FLx10SHx80 OAL SC HOLEMILL WITH DURANA COATING

Ø5.12x30(35)FLx6SHx70 OAL SC HOLEMILL WITH DURANA COATING

Ø6.002x25(35)FLx8SHx80 OAL SC REAMER WITH DURANA COATING

Ø4x45°x50 SC BACK CHF TOOL

32-32-M4-T12-Ø200-Ø300 LH HOLDER

25-25-M4-T12-Ø200-Ø300 LH HOLDER

Ø7.01x25FLx8SHx65 OAL SC REAMER UN-COATED

ØMIN4.8x16Lx6SHx60 OAL SC BORING TOOL LH

16ER 2.0ISO TCGM3225 KORBLADE CARBIDE INSERTS.(BMC-T-883)

16ER 2.5ISOTCGM3225 KORBLADE CARBIDE INSERTS. (BMC-T-882

16ER 1.5ISO TCGM3225 KORBLADE CARBIDE INSERTS.(BMC-T-881)

16ER 105ISO-LF6118 KORBLADE CARBIDE INSERTS. (BMC-T-880)

25-25 ECLNR-M12 RH CNMG TOOL HOLDER

32x32-RCGX-09-23.5° SPL TOOL HOLDER

32x32 RCGX-09-43.5° SPL TOOL HOLDER

Ø5.0x15.32Lx45°x8SHx65 OAL SC STEP DRILL WITH COATING

Ø5.2x13.82Lx45°x8SHx65 OAL SC STEP DRILL WITH COATING

Ø6.75x15.32Lx45°x10SHx65 OAL SC STEP DRILL WITH COATING

Ø6.6x13.82Lx45°x10SHx65 OAL SC STEP DRILL WITH COATING

Ø6.75x14.32Lx45°x10SHx65 OAL SC STEP DRILL WITH COATING

2 NOS SENT AS IT IS

Ø75x55°x25SHx125 OAL CT DOVETAIL CUTTER

Ø75x55°x25SHx125 OAL VBMT DOVETAIL CUTTER

Ø10.2x30ST/Lx45°x42FLx14SHx80 OAL SC STEP DRILL WITH COATING (TT01042)

BORING TOOL. S20xDMIN21 SCLCL-09

TURNING TOOL. 25-25 TOP CLAMPING HOLDER

TURNING TOOL. 25-25 TOP CLAMPING HOLDER

ID GROOVING TOOL. S40xDMIN57 LH HOLDER

BORING TOOL. S16xDMIN18 SCLCL-09

ID GROOVING TOOL. S20xDMIN25 LH HOLDER

ID GROOVING TOOL. S20xDMIN25 LH HOLDER

ID GROOVING TOOL. S25xDMIN22 LH HOLDER

ID GROOVING TOOL. S25xDMIN41 MGMN LH HOLDER

"U" DRILL. A32xØ38x110WL WITH THROUGH COOLANT

"U" DRILL. A32xØ24.0x80WL WITH THROUGH COOLANT

"U" DRILL. A32xØ34.0x110WLxWCMT06 WITH THROUGH COOLANT .

Ø29x40FLx20SHx100 OAL INSERT TYPE CORE DRILL

Ø29x40FLx20SHx100 OAL INSERT TYPE CORE DRILL

Ø9.8x25(35)FLx10SHx80 OAL SC HOLE MILL WITH COATING FOR TITANIUM

Ø25x60FLx20SHx110 OAL SC ENDMILL WITH COATING

Ø20x85FLx20SHx125 OAL SC ENDMILL WITH COATING

Ø20x60FLx20SHx110 OAL SC ENDMILL WITH COATING

Ø14x40FLx14SHx80 OAL SC BALL MILL WITH COATING

Ø19x40FLx20SHx80 OAL SC FLAT DRILL WITH COATING

4MM GROOVING WIDIA INSERTS

EWLNL-25-25-MO8 LH TOOL HOLDER

VEBMT INSERTS NEW

10x10x16 VBMT 15° SPL HOLDER

SOLIDE CARBIDE STEP DRILL

Ø44x4Wx16x24NLx25SHx100 OAL CT "T" CUTTER (TL0000722)

Ø4.8x40FLx6SHx100 OAL SC REAMER R/S & COATING

KORBLADE THREADING INSERTS-11 IR2.0ISO-TCGM3225(BMC-T-851)

Ø12x3.0Rx30FLx12SHx75 OAL SC END MILL FOR ALU UN-COATED.(BMC-T-862)

Ø1.5x11FLx4SHx50 OAL SC ENDMILL FOR ALU UN-COATED (BMC-T-863)

Ø1.8x8FLx4SHx75 OAL SC DRILL FOR ALU UN-COATED(BMC-T-864)

Ø12x10°PER SIDE x12SHx65 OAL SC CHF TOOL WITH COATING FOR SS (BMC-T-865)

TNMG160412-DF20M KORBLADE CARBIDE INSERTS.(MBC-T-870)

TNMG160412-HAK230 KORBLADE CARBIDE INSERTS(BMC-T-869)

TNMG160412-HS7225 KORBLADE CARBIDE INSERTS(BMC-T-868)

Ø12x30FLx12SHx75 OAL SC ENDMILL WITH COATING

Ø3.1x36FLx4SHx90 OAL SC FLAT DRILL WITH COATING

Ø10x25FLx10SHx75 OAL SC ENDMILL WITH COATING

Ø6.2x45FLx8SHx80 OAL SC DRILL WITH COATING FOR SS.

Ø10.125x25FLx12SHx86 OAL SC HOLE MILL WITH COATING FOR TITANIUM

Ø4.78x15FLx6SHx60 OAL SC REAMER WITH COATING

Ø4.82x15FLx6SHx60 OAL SC REAMER WITH COATING

Ø13.5x60FLx14SHx105 OAL SC T/C DRILL WITH COATING

Ø11x60FLx12SHx105 OAL SC T/C DRILL WITH COATING

Ø8.5x60FLx10SHx105 OAL SC T/C DRILL WITH COATING

Ø12x30FLx12SHx100 OAL SC ENDMILL UN-COATED FOR ALU SH/RELIEF UP TO 70MM

Ø8x20FLx8SHx70 OAL SC END MILL UN-COATED

Ø25x25x115 OAL SC ENDMILL RE-SHARPENING & COATING

Ø8x40FLx80 OAL SC DRILL RESHARPENING & COATING

DNMG GROOVING INSERTS CONVERTION ONLY

DNMG GROOVING INSERT CONVERTION & COATING

Ø9.0x60FLx9SHx100 OAL SC ENDMILL WITH COATING

Ø9.0x40FLx9SHx80 OAL SC END MILL WITH COATING

Ø8.0x20FLx8SHx65 OAL SC REAMER WITH COATING

Ø8.01x20FLx8SHx65 OAL SC REAMER WITH COATING

KNURLING WHEEL TOOL HOLDER (BMC-T-807)

Ø19.04x9.52WxID6.35 KNURLING WHEEL (BMC-T-806)

Ø20x60FLx20SHx120 OAL SC ENDMILL WITH COATING(CEAR ROD)

Ø10.2x45°x12SHx80 OAL SC STEP DRILL WITH COATING(CERA ROD)

Ø16x50FLx16SHx100 OAL SC HIGH HELIX ENDMILL WITH COATING(CERA ROD)

Ø10x35FLx10SHx80 OAL SC ENDMILL WITH COATING(CERA ROD)

Ø4x25FLx4SHx75 OAL SC ENDMILL WITH COATING(CERA ROD)

Ø24.25x65FLx20SHx110 OAL SC DRILL WITH COATING(CERA ROD)

Ø15.25x65FLx16SHx110 OAL SC DRILL WITH COATING (CERA ROD)

Ø9.25x8.3FLATx10SHx60 OAL SC PUNCH TOOL

KORBLADE CARBIDE INSERTS(TNMG-160412LF6118)(BMC-T-809)

UP TO 4MM WITHOUT OPERATION

Ø7.4x45°x5.96Wx4.8x15NLx8SHx65 OAL SC FRONT & BACK CHF TOOL WITH COATING

ØMIN12.2x45°x16SHx65 OAL SC SPL CHF TOOL WITH COATING

ØMIN16x30°x3.2Hx50WLx16SHx90 OAL SC TP THRAEDING TOOL WITH COATING FOR BRONZE.(BMC-T-838)

ØMIN2.8x1WLx6SHx50 OAL SC BORING TOOL WITH COATING FOR SS.(BMC-T-764)

Ø12x45°x1.59Rx12SHx65 OAL SC TAPER BALL MILL WITH COATING FOR SS.(BMC-T-841)

Ø12x35°x12SHx65 OAL SC CHF TOOL UN-COATED FOR ALU.(BMC-T-840

Ø3.35x35FLx3SHx80 OAL SC DRILL UN-COATED FOR ALU

Ø2.78x30FLx4SHx90 OAL SC DRILL UN-COATED FOR ALU. (BMC-T-828)

Ø1.6x15FLx4SHx50 OAL SC DRILL UN-COATED FOR ALU.(BMC-T-827)

Ø5.6x35FLx6SHx75 OAL SC DRILL UN-COATED FOR ALU.(BMC-T-826)

Ø5.983x30FLx6SHx75 OAL SC REAMER UN-COATED. (BMC-T-825)

Ø5.82x30FLx6SHx75 OAL SC DRILL UN-COATED FOR ALU. (BMC-T-824)

8x25FLx2.0Rx8SHx75 OAL SC BULL MILL UN-COATED FOR ALU.(BMC-T-823)

Ø12.7x6.35Rx10SHx75 OAL SC LOLYPOP CUTTER UN-COATED FOR ALU. (BMC-T-822)

Ø1.6x25FLx8SHx75 OAL SC DRILL UN-COATED FOR ALU. (BMC-T-821)

1.5x7FLx8SHx60 OAL SC ENDMILL UN-COATED FOR ALU. (BMC-T-820)

Ø4.2x82FLx6SHx120 OAL SC DRILL UN-COATED. (BMC-T-819)

Ø4.2x70FLx6SHx110 OAL SC DRILL UN-COATED FOR ALU.(BMC-T-818)

Ø4.2x50FLx6SHx100 OAL SC DRILL UN-COATED FOR ALU. (BMC-T-817)

TNMG160408-LF-6118 KORBLADE (MBC-T-833)

Ø3.08 REAMER CONVERTED TO 3.04

Ø4x10Lx3SHx90°x60 OAL SC CHF TOOL D/EDGE WITH COATING

Ø3x10Lx3SHx90°x60 OAL SC CHF TOOL D/EDGE COATED

Ø3x45°x3SHx60 OAL SC CHF TOOL UN-COATED D/EDGE

Ø10.2x45°x12SHx80 OAL SC STEP DRILL WITH COATING.(TT01041)

Ø16x50FLx16SHx100 OAL SC HIGH HELIX ENDMILL WITH COATING. (TT04524)

Ø10x35FLx10SHx80 OAL SC ENDMILL WITH COATING. (TT00203)

Ø4x25FLx4SHx75 OAL SC ENDMILL WITH COATING. (TT01267))

Ø20x60FLx20SHx120 OAL SC ENDMILL WITH COATING(TT01844)

Ø24.25x65FLx20SHx110 OAL SC DRILL WITH COATING. (TT00729)

Ø15.25x65FLx16SHx110 OAL SC DRILL WITH COATING. (TT00725)

SNMA 120408 UC YG 1001 RE-GRINDING & COATING

Ø5.05x50FLx6SHx100 OAL SC HOLE MILL UN-COATED

MRFCSH06047C1420UN-16.5 RELIEF

Ø16x1.5Wx10SHx60 OAL SC T CUTTER UN-COATED

Ø16x1.75Wx10SHx60 OAL SC T CUTTER UN-COATED

KORBLADE 16IR2.0 ISO HS7225 INSERTS (BMC-T-815)

Ø9.3x30L GO & Ø9.7x30L NO GO PLUG GAUGE WITH HANDLE

Ø16x30L GO & Ø16.3x30L NO-GO PLUG GAUGE WITH HANDLE

Ø3.3x4Lx6SHx50 OAL SC DRILL UN-COATED

Ø2x6FLx20RLx4SHx55 SC ENDMILL FOR ALU

Ø2x6FLx20RLx4SHx55 SC ENDMILL FOR ALU

Ø1.500x10L GO & Ø1.510x10L NO-GO GUAGE WITH HANDLE

Ø1.570x10L GO & Ø1.600x10L NO-GO GUAGE WITH HANDLE

Ø1.52x10L GO & Ø1.550x10L NO-GO GUAGE WITH HANDLE

Ø1.00x10L GO & Ø1.006x10L NO-GO GUAGE WITH HANDLE

Ø1.500x6L GO & Ø1.510x6L NO-GO GUAGE WITH HANDLE

Ø1.570x8L GO & Ø1.600x8L NO-GO GAUGE WITH HANDLE

Ø1.520x8L GO & Ø1.55x8L NO-GO GAUGE WITH HANDLE

Ø1.0x5L GO & Ø1.006x5L NO-GO GAUGE WITH HANDLE

Ø16.8x70FLx18SHx110 OAL SC T/C DRILL WITH COATING

Ø13.8x80FLx14SHx120 OAL SC T/C DRILL WITH COATING

Ø6.2x60FLx8SHx110 OAL SC DRILL WITH COATING

Ø7x60FLx8SHx110 OAL SC DRILL WITH COATING

Ø5.05x50FLx6SHx100 OAL SC DRILL WITH COATING

Ø6x60FLx8SHx110 OAL SC DRILL WITH COATING

Ø50xID23x25SHx100 OAL INDUXEBLE TRIPANION TOOL

Ø11 DRILL R/S & SH/RELIEF

ØMIN3.1x11WLx6SHx60 OAL SC BORING TOOL D/EDGE WITH COATING

Ø1.5x4FLx4SHx50 OAL SC FLAT MILL WITH COATING SPT

Ø8x25FLx8SHx60 OAL SC FLATE MILL WITH COATING FOR 65HRC

Ø6x20FLx6SHx50 OAL SC BALL MILL WITH COATING FOR 65HRC

Ø20x50 SC PROFILE TOOL

PCD INSERTS TPGW 080204

KORBLADE CARBIDE INSERTS(VNMG-12T308LF6118) BMC-T-810

KORBLADE CARBIDE INSERTS(TNMG-160412LF9218)(BMC-T-816)

KORBLADE CARBIDE INSERTS(TNMG-160404LF6118) BMC-T-808

Ø6x6x20x65 SH/RLF UP TO 30MM

Ø3x6x8x57E/M SH/RLF UP TO 15MM

Ø14x2.0 IR NEW FORMING

Ø12x75°x0.15Rx8SHx60 OAL SC DOVETAIL CUTTER WITH COATING

Ø12.6x660FLx14SHx105 OAL SC DRILL NON-T/C WITH COATING

Ø16.8x75FLx18SHx120 OAL SC DRILL NON-T/C WITH COATING

Ø25MMx40L INSERT TYPE SPOT FACE TOOL

Ø16.5x150FLx180 OAL HSS COBALT DILL

Ø16.5x150FLx180 OAL HSS COBALT DILL

Ø32 L/D-2 U DRILL SHORT SERIES

Ø20.5 L/D-2 U DRILL SHORT SERIES

Ø14x60FLx14SHx100 OAL SC ENDMILL WITH COATING

Ø20x50FLx20SHx100 OAL SC BALL MILL WITH COATING

Ø25x85FLx20SHx125 OAL SC Z6 ENDMILL WITH COATING

Ø20x55FLx20SHx105 OAL SC T/C DRILL WITH COATING

Ø10.2x65FLx12SHx120 OAL SC T/C DRILL WITH COATING

Ø8x30FLx8SHx75 OAL SC ENDMILL WITH COATING

Ø23x30FLx20SHx75 OAL SC NON-T/C FLAT DRILL WITH COATING

Ø28x30FLx20SHx75 OAL SC NON-T/C FLAT DRILL WITH COATING

Ø8x65FLx8SHx100 OAL SC T/C DRILL WITH COATING

Ø8x65FLx8SHx100 OAL SC T/C DRILL WITH COATING

Ø19x90FLx20SHx130 OAL SC T/C DRILL WITH COATING

Ø10x65FLx10SHx110 OAL SC T/C DRILL WITH COATING

Ø20x80FLx20SHx150 OAL SC ENDMILL UN-COATED FOR ALU (BMC-T-793)

Ø20x80FLx20SHx150 OAL SC ENDMILL UN-COATED FOR ALU (BMC-T-793)

Ø8x20FLx8SHx75 OAL SC ENDMILL WITH COATING FOR SS(BMC-T-792)

Ø10.02x20FLx10SHx50 OAL SC REAMER UN-COATED

ØMIN2.2x5Lx6SHx65 OAL SC BORING TOOL WITH COATING D/EDGE

ØMIN2.2x5Lx6SHx65 OAL SC BORING TOOL WITH COATING D/EDGE

Ø40x300 WNMG LH BORING BAR

Ø40x300 CNMG LH BORING BAR

25x25-CNMG LG HOLDER

Ø1.0x3Lx4SHx50 OAL SC SPL FLAT MILL

Ø16x45° & Ø10x45° RETURN AS IT IS

Ø24.25x25Lx40WLx25SHx120 OAL CT REAMER